產品介紹
-
-
TUBE管件介紹
規格
| 安裝說明 Installation Instructions | |
| ・ 步驟1 STEP 1 確保螺母是用手指擰緊的，將管子放入管接頭中，直到管端在接頭內部的底部 Make sure the nut is finger-tight. Put the tubing into the tu be fitting until the tube end bottoms on shoulder inside the fitting. |
|
| ・ 步驟2 STEP 2 1 用一把板手握住配件本體，用板手將螺母擰緊1-1/4圈 Tighten the nut 1-1/4 turn with a wrench by holding the fi tting body with a back up wrench. 2 可能需要在螺母9點鐘位置標註記號，以便計算轉1-1/4後所停留的位置 Marking the nut at 9 o’clock position maybe necessary for counting the number of turns as the mark will stop at the o’clock posi tion after 1-1/4 turns. |
|
| ・ NOTE 僅1/8"、3/16"、3mm和4mm尺寸需要擰緊3/4圈，在用手擰緊後 Only 3/4 turn from finger tight is required for sizes 1/8", 3 /16", 3mm and 4mm. |
| 產品編碼 Designation part number system | |||||||
| T | 1 | 2 | 3 | 4 | 5 | ||
| 產品代碼 Name of Fitting |
材質 Material |
Tube管外徑 O.D | Tube管外徑 O.D | Pipe管螺紋 Thread | |||
| 1 產品代碼 Name of Fitting | |
| 產品名稱 | 代碼 |
| 參考型錄產品代碼 Reference Cat.NO. | |
| 2 材質 / 代碼Material | |||||
| 材質 | 代碼 | ||||
| 不鏽鋼SUS316 | S6 | ||||
| Brass黃銅 | B1 | ||||
| 3-4 尺寸 / 代碼 英制 Fractional / 單位Inch | ||||||||||
| Tube O.D | 1/16" | 1/8" | 3/16" | 1/4" | 5/16" | 3/8" | 1/2" | 5/8" | 3/4" | 1" |
| Code | 10 | 20 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 |
| 公制 Metric / 單位mm | ||||||||||||||
| Tube O.D | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | 22 | 25 |
| Code | 02M | 03M | 04M | 06M | 08M | 10M | 12M | 14M | 15M | 16M | 18M | 20M | 22M | 25M |
| 3 螺紋 / 代碼 | |||||
| 螺紋 | 代碼 | ||||
| BSPT(英牙) | P | ||||
| NPT(美牙) | no show不顯示 | ||||
| 範例 Example | ||||||
| T | MC | S3 | 80 | 80 | ||
| 產品代碼 Name of Fitting |
材質 Material | Tube管外徑 O.D | Pipe管螺紋 Thread(NPT) | |||
| 外管外牙直接頭 Male connector |
SUS316 | 1/2"OD | 1/2"NPT | |||
| T | UT | B1 | 80 | |||
| 產品代碼 Name of fitting |
材質 Material | Tube管外徑 O.D | Pipe管螺紋 Thread | |||
| 外管由任三通 Union Tee |
銅 Copper | 1/2"OD | ||||
產品諮詢