產品介紹

  • HP-T 高壓鍛造T型三通

規格
產品編碼 Designation part number system
HP 1 2 3 4 5
  產品代碼
Name of Fitting
壓力值&立布短管厚度代碼
Pressure & NIP thickess
尺寸代碼
Hub Size
端口連接型式:螺紋&套焊
Port type: Thread End&Socket-Weld End
材質代碼
Material
 
1  產品代碼 Name of Fitting
產品 代碼
參考型錄產品代碼 Reference Cat.NO.
2  壓力值&立布短管厚度代碼 Pressure & NIP thickess
壓力 代碼
Thread End: 2000, 3000, 6000 LBS (磅) 2, 3, 6
Socket-Weld End: 3000, 6000, 9000 LBS (磅)  3, 6, 9
 
短管厚度 代碼
SCH40, SCH80, SCH160, XXS S40, S80, S160, XXS
3 尺寸代碼 Hub Size
Pipe Size 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"
Code 01 02 03 04 06 1 12 15 2 25 3 4
 
4  端口連接型式:螺紋&套焊 Port type: Thread End&Socket-Weld End
端口連接形式 代碼
Thread standard: BSPT (英牙) P
Thread standard: NPT (美牙) N
Socket-Weld End (套焊) SW
5  材質代碼Material
材質 代碼
A105, A106 A (Anti-rust Oil Coating 黑品)
A105, A106 E (Zinc Electroplated 電鍍鋅)
A105, A106 H (Hot Dip Galvanized 熱浸鍍鋅)
A182 F304 (304L) S4 (不鏽鋼304#)
A182 F316 (316L)  S6 (不鏽鋼316#)
Optional Material SPEC:
A350 LF2, A403, A234, A182 (F304H, F317L, F321, F5, F9, F11, F22, F44, F51, F53, F91)
DIM.SPEC. : ASME B16.11 MSS SP-79,83,95,97,BS3799
 
範例 Example
HP T 2 04 N A
  產品代碼
Name of Fitting
壓力值&立布短管厚度代碼
Pressure & NIP thickness
尺寸代碼
Hub Size
端口連接形式:螺紋&套焊
Port type: Thread End&Socket-Weld End
材質代碼
Material
  三通Tee 2000 LBS 1/2" NPT A105
 
HP NIP S80 1 N 3L S6
  產品代碼
Name of Fitting
壓力值&立布短管厚度代碼
Pressure & NIP thickness
尺寸代碼
Hub Size
端口連接形式:螺紋&套焊
Port type: Thread End&Socket-Weld End
立布長度
NIP Length
材質代碼
Material
  立布短管Nipple SCH 80 1" NPT 3"L(75mm) A182 F316
 
HP HBU 3 1M N 06F N S6
  產品代碼
Name of Fitting
壓力值&立布短管厚度代碼
Pressure & NIP thickness
尺寸代碼(外牙)
Hub Size(Male)
端口連接形式:螺紋&套焊
Port type: Thread End&Socket-Weld End
尺寸代碼(內牙)
Hub Size(Female)
端口連接形式:螺紋&套焊
Port type: Thread End&Socket-Weld End
材質代碼
Material
  卜申Bushing 3000 LBS 1"外牙 Male NPT 3/4"內牙 Female NPT A182 F316
 
詳細介紹
Socket-Welding Fittings.
ASME B16.11-2016 (Revision of ASME B16.11-2011)
·Dimensions in Millimeters
DN Nom.
Pipe
Size
Socket
Bore
Dia.(2)
B
Bore Diameter
of ittings(2) D
Socket Wall Thickness(1) C Body Wall
Thickness G
Depth
of
Socket
Min J
Class Designation
Class Designation 3000 6000 9000 Class Designation
3000 6000 9000 Aev. Min. Aev. Min. Aev. Min. 3000 6000 9000
Min. Min. Min.
6 1/8 11.2
10.8
7.6
6.1
4.8
3.2
  3.18 3.18 3.96 3.43     2.41 3.15   9.5
8 1/4 14.6
14.2
10.0
8.5
7.1
5.6
  3.78 3.30 4.60 4.01     3.02 3.68   9.5
10 3/8 18.0
17.6
13.3
11.8
9.9
8.4
  4.01 3.50 5.03 4.37     3.20 4.01   9.5
15 1/2 22.2
21.8
16.6
15.0
12.5
11.0
7.2
5.6
4.67 4.09 5.97 5.18 9.35 8.18 3.73 4.78 7.47 9.5
20 3/4 27.6
27.2
21.7
20.2
16.3
14.8
11.8
10.3
4.90 4.27 6.96 6.04 9.78 8.56 3.9 5.56 7.8 12.5
25 1 34.3
33.9
27.4
25.9
21.5
19.9
16.0
14.4
5.69 4.98 7.92 6.93 11.38 9.96 4.55 6.35 9.09 12.5
32 1-1/4 43.1
42.7
35.8
34.3
30.2
28.7
23.5
22.0
6.07 5.28 7.92 6.93 12.14 10.62 4.85 6.35 9.70 12.5
40 1-1/2 49.2
48.8
41.6
40.1
34.7
33.2
28.7
27.2
6.35 5.54 8.92 7.60 12.7 11.12 5.08 7.14 10.15 12.5
50 2 61.7
61.2
53.3
51.7
43.6
42.1
38.9
37.4
6.93 6.04 10.92 9.50 13.84 12.12 5.54 8.74 11.07 16.0
65 2-1/2 74.4
73.9
64.2
61.2
    8.76 7.67         7.01     16.0
80 3 90.3
89.8
79.4
76.4
    9.52 8.30         7.62     16.0
100 4 115.7
115.2
103.8
100.7
    10.69 9.35         8.56     19.0
NOTE.
·Average of Socket Wall Thickness around periphery shall be no l ess than listed values.
The minimum values are permitted in localized areas.
·Upper and lower values for each size are the respective maximum and minimum dimensions.
 
·Dimensions in Millimeters
DN Nom.
Pipe
Size
Center to Bottom of Socket-A Laying Lengths Tolerances End Wall
Thickness
K Min
90º Elbows
Tees, Crosses
45º Elbows Couplings
E
Half
Couplings
E
A E F
Class Designation Class Designation
3000 6000 9000 3000 6000 9000 3000 6000 9000
6 1/8 11.0 11.0   8.0 8.0   6.5 16.0 1.0 1.5 1.0 4.8 6.4  
8 1/4 11.0 13.5   8.0 8.0   6.5 16.0 1.0 1.5 1.0 4.8 6.4  
10 3/8 13.5 15.5   8.0 11.0   6.5 17.5 1.5 3.0 1.5 4.8 6.4  
15 1/2 15.5 19.0 25.5 11.0 13.0 15.5 9.5 22.5 1.5 3.0 1.5 6.4 7.9 11.2
20 3/4 19.0 22.5 28.5 13.0 14.0 19.0 9.5 24.0 1.5 3.0 1.5 6.4 7.9 12.7
25 1 22.5 27.0 32.0 14.0 17.5 20.5 12.5 28.5 2.0 4.0 2.0 9.6 11.2 14.2
32 1-1/4 27.0 32.0 35.0 17.5 20.5 22.5 12.5 30.0 2.0 4.0 2.0 9.6 11.2 14.2
40 1-1/2 32.0 38.0 38.0 20.5 22.5 25.5 12.5 32.0 2.0 4.0 2.0 11.2 12.7 15.7
50 2 38.0 41.0 54.0 25.5 28.5 28.5 19.0 41.0 2.0 4.0 2.0 12.7 15.7 19.0
65 2-1/2 41.0     28.5     19.0 43.0 2.5 5.0 2.5 15.7 19.0  
80 3 57.0     32.0     19.0 44.5 2.5 5.0 2.5 19.0 22.4  
100 4 66.5     410     19.0 48.0 2.5 5.0 2.5 22.4 28.4  
NOTE.
·Average of Socket Wall Thickness around periphery shall be no l ess than listed values.
The minimum values are permitted in localized areas.
·Upper and lower values for each size are the respective maximum and minimum dimensions.
產品諮詢