EN 繁

產品介紹

首頁
>
產品介紹
>
高壓管&配件產品
>
HP-SNB90 高壓鍛造90°彎頭

HP-SNB90 高壓鍛造90°彎頭

規格

產品編碼 Designation part number system
HP	1	2	3	4	5
	產品代碼 Name of Fitting	壓力值&立布短管厚度代碼 Pressure & NIP thickess	尺寸代碼 Hub Size	端口連接型式：螺紋＆套焊 Port type: Thread End&Socket-Weld End	材質代碼 Material

1 產品代碼 Name of Fitting
產品	代碼
參考型錄產品代碼 Reference Cat.NO.

2 壓力值&立布短管厚度代碼 Pressure & NIP thickess
壓力	代碼
Thread End: 2000, 3000, 6000 LBS (磅)	2, 3, 6
Socket-Weld End: 3000, 6000, 9000 LBS (磅)	3, 6, 9

短管厚度	代碼
SCH40, SCH80, SCH160, XXS	S40, S80, S160, XXS

3 尺寸代碼 Hub Size
Pipe Size	1/8"	1/4"	3/8"	1/2"	3/4"	1"	1-1/4"	1-1/2"	2"	2-1/2"	3"	4"
Code	01	02	03	04	06	1	12	15	2	25	3	4

4 端口連接型式：螺紋＆套焊 Port type: Thread End&Socket-Weld End
端口連接形式	代碼
Thread standard: BSPT (英牙)	P
Thread standard: NPT (美牙)	N
Socket-Weld End (套焊)	SW

5 材質代碼Material
材質	代碼
A105, A106	A (Anti-rust Oil Coating 黑品)
A105, A106	E (Zinc Electroplated 電鍍鋅)
A105, A106	H (Hot Dip Galvanized 熱浸鍍鋅)
A182 F304 (304L)	S4 (不鏽鋼304#)
A182 F316 (316L)	S6 (不鏽鋼316#)
Optional Material SPEC: A350 LF2, A403, A234, A182 (F304H, F317L, F321, F5, F9, F11, F22, F44, F51, F53, F91)
DIM.SPEC. : ASME B16.11	MSS SP-79，83，95，97，BS3799

範例 Example
HP	T	2	04	N	A
	產品代碼 Name of Fitting	壓力值&立布短管厚度代碼 Pressure & NIP thickness	尺寸代碼 Hub Size	端口連接形式：螺紋&套焊 Port type: Thread End&Socket-Weld End	材質代碼 Material
	三通Tee	2000 LBS	1/2"	NPT	A105

HP	NIP	S80	1	N	3L	S6
	產品代碼 Name of Fitting	壓力值&立布短管厚度代碼 Pressure & NIP thickness	尺寸代碼 Hub Size	端口連接形式：螺紋&套焊 Port type: Thread End&Socket-Weld End	立布長度 NIP Length	材質代碼 Material
	立布短管Nipple	SCH 80	1"	NPT	3"L(75mm)	A182 F316

HP	HBU	3	1M	N	06F	N	S6
	產品代碼 Name of Fitting	壓力值&立布短管厚度代碼 Pressure & NIP thickness	尺寸代碼(外牙) Hub Size(Male)	端口連接形式：螺紋&套焊 Port type: Thread End&Socket-Weld End	尺寸代碼(內牙) Hub Size(Female)	端口連接形式：螺紋&套焊 Port type: Thread End&Socket-Weld End	材質代碼 Material
	卜申Bushing	3000 LBS	1"外牙 Male	NPT	3/4"內牙 Female	NPT	A182 F316

詳細介紹

Thread Fittings.
ASME B16.11-2016 (Revision of ASME B16.11-2011)

·Dimensions in Millimeters
DN	Nom. Pipe Size	Center to End Elbow, Tess, Cross			Center to End 45º Elbow			Outside Diameter of Band			Mnimum Wall Thickness			Length of Thread. Min(1)
		A			C			H			G			Length of Thread. Min(1)
		2000	3000	6000	2000	3000	6000	2000	3000	6000	2000	3000	6000	B	L2
6	1/8	21	21	25	17	17	19	22	22	25	3.18	3.18	6.35	6.4	6.7
8	1/4	21	25	28	17	19	22	22	25	33	3.18	3.30	6.60	8.1	10.2
10	3/8	25	28	33	19	22	25	25	33	38	3.18	3.51	6.98	9.1	10.4
15	1/2	28	33	38	22	25	28	33	38	46	3.18	4.09	8.15	10.9	13.6
20	3/4	33	38	44	25	28	33	38	46	56	3.18	4.32	8.53	12.7	13.9
25	1	38	44	51	28	33	35	46	56	62	3.68	4.98	9.93	14.7	17.3
32	1-1/4	44	51	60	33	35	43	56	62	75	3.89	5.28	10.59	17.0	18.0
40	1-1/2	51	60	64	35	43	44	62	75	84	4.01	5.56	11.07	17.8	18.4
50	2	60	64	83	43	44	52	75	84	102	4.27	7.14	12.09	19.0	19.2
65	2-1/2	76	83	95	52	52	64	92	102	121	5.61	7.65	15.29	23.6	28.9
80	3	86	95	106	64	64	79	109	121	146	5.99	8.84	16.64	25.9	30.5
100	4	106	114	114	79	79	79	146	152	152	6.55	11.18	18.67	27.7	33.0
·Dimensions B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American National Standard for Pipe Threads (ANSI / ASME B1.20.1)

·Dimensions in Millimeters
DN	Nom. Pipe Size	End to End Couplings	End to End Caps		Outside Diameter		End Wall Thickness		Length of Thread. Min(1)
		W	P		D		G Min		Length of Thread. Min(1)
		3000&6000	3000	6000	3000	6000	3000	6000	B	L2
6	1/8	32	19	-	16	22	4.8	-	6.4	6.7
8	1/4	35	25	27	19	25	4.8	6.4	8.1	10.2
10	3/8	38	25	27	22	32	4.8	6.4	9.1	10.4
15	1/2	48	32	33	28	38	6.4	7.9	10.9	13.6
20	3/4	51	37	38	35	44	6.4	7.9	12.7	13.9
25	1	60	41	43	44	57	9.7	11.2	14.7	17.3
32	1-1/4	67	44	46	57	64	9.7	11.2	17.0	18.0
40	1-1/2	79	44	48	64	76	11.2	12.7	17.8	18.4
50	2	86	48	51	76	92	12.7	15.7	19.0	19.2
65	2-1/2	92	60	64	92	108	15.7	19.0	23.6	28.9
80	3	108	65	68	108	127	19.0	22.4	25.9	30.5
100	4	121	68	75	140	159	22.4	28.4	27.7	33.0
·Dimensions B is minimum length of perfect thread. The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than L2 (effective length of external thread) required by American National Standard for Pipe Threads (ANSI / ASME B1.20.1)

產品諮詢