Product
- Home
- >
- Product
- >
- High Pressure Tubes & Fittings High Pressure Pipes & Fittings
- >
- TUBE Fittings
-
-
TUBE Fittings
Specification
| Installation Instructions | |
| ・STEP 1 Make sure the nut is finger-tight. Put the tubing into the tu be fitting until the tube end bottoms on shoulder inside the fitting. |
|
| ・STEP 2 1 Tighten the nut 1-1/4 turn with a wrench by holding the fitting body with a back up wrench. 2 Marking the nut at 9 o’clock position maybe necessary for counting the number of turns as the mark will stop at the o’clock posi tion after 1-1/4 turns. |
|
| ・ NOTE Only 3/4 turn from finger tight is required for sizes 1/8", 3 /16", 3mm and 4mm. |
| Designation part number system | |||||||
| T | 1 | 2 | 3 | 4 | 5 | ||
| Name of Fitting | Material | Tube O.D | Tube O.D | Pipe Thread | |||
| 1 Name of Fitting | |
| Name of fittings | Code |
| Reference Cat.NO. | |
| 2 Material / Code | |||||
| Material | Code | ||||
| SUS316 | S6 | ||||
| Brass | B1 | ||||
| 3-4 TUBE O.D / Code Fractional / Inch | ||||||||||
| Tube O.D | 1/16" | 1/8" | 3/16" | 1/4" | 5/16" | 3/8" | 1/2" | 5/8" | 3/4" | 1" |
| Code | 10 | 20 | 30 | 40 | 50 | 60 | 80 | 100 | 120 | 160 |
| Metric / mm | ||||||||||||||
| Tube O.D | 2 | 3 | 4 | 6 | 8 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | 22 | 25 |
| Code | 02M | 03M | 04M | 06M | 08M | 10M | 12M | 14M | 15M | 16M | 18M | 20M | 22M | 25M |
| 3 Thread / Code | |||||
| Thread | Code | ||||
| BSPT | P | ||||
| NPT | no show | ||||
| Example | ||||||
| T | MC | S3 | 80 | 80 | ||
| Name of Fitting | Material | Tube O.D | Pipe Thread(NPT) | |||
| Male connector | SUS316 | 1/2"OD | 1/2"NPT | |||
| T | UT | B1 | 80 | |||
| Name of fitting | Material | Tube O.D | Pipe Thread | |||
| Union Tee | Copper | 1/2"OD | ||||
Product Consultation