Product
- Home
- >
- Product
- >
- High Pressure Tubes & Fittings High Pressure Pipes & Fittings
- >
- HP-SWNIP SWAGE NIPPLE
-
-
HP-SWNIP SWAGE NIPPLE
Specification
| Designation part number system | |||||
| HP | 1 | 2 | 3 | 4 | 5 |
| Name of Fitting | Pressure & NIP thickess | Hub Size | Port type: Thread End&Socket-Weld End | Material | |
| 1 Name of Fitting | |||||
| Name of fittings | Code | ||||
| Reference Cat.NO. | |||||
| 2 Pressure & NIP thickess | |||||
| Pressure | Code | ||||
| Thread End: 2000, 3000, 6000 LBS | 2, 3, 6 | ||||
| Socket-Weld End: 3000, 6000, 9000 LBS | 3, 6, 9 | ||||
| NIP Pipe thickness | Code | ||||
| SCH40, SCH80, SCH160, XXS | S40, S80, S160, XXS | ||||
| 3 Hub Size / Code | ||||||||||||
| Hub Size | 1/8" | 1/4" | 3/8" | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" |
| Code | 01 | 02 | 03 | 04 | 06 | 1 | 12 | 15 | 2 | 25 | 3 | 4 |
| 4 Port type: Thread End&Socket-Weld End | |||||
| Port Type | Code | ||||
| Thread standard: BSPT | P | ||||
| Thread standard: NPT | N | ||||
| Socket-Weld End | SW | ||||
| 5 Material / Code | |||||
| Material | Code | ||||
| A105, A106 | A (Anti-rust Oil Coating ) | ||||
| A105, A106 | E (Zinc Electroplated ) | ||||
| A105, A106 | H (Hot Dip Galvanized ) | ||||
| A182 F304 (304L) | S4 (304#) | ||||
| A182 F316 (316L) | S6 (316#) | ||||
| Optional Material SPEC: A350 LF2, A403, A234, A182 (F304H, F317L, F321, F5, F9, F11, F22, F44, F51, F53, F91) |
|||||
| DIM.SPEC. : ASME B16.11 | MSS SP-79，83，95，97，BS3799 | ||||
| Example | |||||
| HP | T | 2 | 04 | N | A |
| Name of Fitting | Pressure & NIP thickness | Hub Size | Port type: Thread End&Socket-Weld End | Material | |
| Tee | 2000 LBS | 1/2" | NPT | A105 | |
| HP | NIP | S80 | 1 | N | 3L | S6 |
| Name of Fitting | Pressure & NIP thickness | Hub Size | Port type: Thread End&Socket-Weld End | NIP Length | Material | |
| Nipple | SCH 80 | 1" | NPT | 3"L(75mm) | A182 F316 | |
| HP | HBU | 3 | 1M | N | 06F | N | S6 |
| Name of Fitting | Pressure & NIP thickness | Hub Size(Male) | Port type: Thread End&Socket-Weld End | Hub Size(Female) | Port type: Thread End&Socket-Weld End | Material | |
| Bushing | 3000 LBS | Male | NPT | Female | NPT | A182 F316 | |
Introduction
SWAGED NIPPLES.
MSS SP-79-2014
MSS SP-79-2014
|
·Dimensions in Millimeters
|
||||||||||||||
| Norminal Pipe Size (NPS) |
Outside Diameter | End to End |
Wall Thickness | |||||||||||
| Large End |
Small End |
T1 | T2 | |||||||||||
| Sch40 (STD) |
Sch80 (XS) |
Sch160 | XXS | Sch40 (STD) |
Sch80 (XS) |
Sch160 | XXS | |||||||
| D1 | D2 | "A" | ||||||||||||
| 1/4 x 3/8 | 13.7 | 10.3 | 57 | 2.2 | 3.0 | 3.7 | 6.1 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 3/8 x 1/8 | 17.1 | 10.3 | 64 | 2.3 | 3.2 | 4.0 | 6.4 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 3/8 x 1/4 | 17.1 | 13.7 | 64 | 2.3 | 3.2 | 4.0 | 6.4 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 1/2 x 1/8 | 21.3 | 10.3 | 70 | 2.8 | 3.7 | 4.7 | 7.5 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 1/2 x 1/4 | 21.3 | 13.7 | 70 | 2.8 | 3.7 | 4.7 | 7.5 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 1/2 x3/8 | 21.3 | 17.1 | 70 | 2.8 | 3.7 | 4.7 | 7.5 | 2.3 | 3.2 | 4.0 | 6.4 | |||
| 3/4 x 1/8 | 26.7 | 10.3 | 76 | 2.9 | 3.9 | 5.5 | 7.8 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 3/4 x 1/4 | 26.7 | 13.7 | 76 | 2.9 | 3.9 | 5.5 | 7.8 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 3/4 X 3/8 | 26.7 | 17.1 | 76 | 2.9 | 3.9 | 5.5 | 7.8 | 2.3 | 3.2 | 4.0 | 6.4 | |||
| 3/4 x 1/2 | 26.7 | 21.3 | 76 | 2.9 | 3.9 | 5.5 | 7.8 | 2.8 | 3.7 | 4.7 | 7.5 | |||
| 1 x 1/8 | 33.4 | 10.3 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 1 x 1/4 | 33.4 | 13.7 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 1 x 3/8 | 33.4 | 17.1 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 2.3 | 3.2 | 4.0 | 6.4 | |||
| 1 x 1/2 | 33.4 | 21.3 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 28 | 3.7 | 4.7 | 7.5 | |||
| 1 x 3/4 | 33.4 | 26.7 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 2.9 | 3.9 | 5.5 | 7.8 | |||
| 1-1/4 x 1/8 | 42.2 | 10.3 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 1-1/4 X 1/4 | 42.2 | 13.7 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 1-1/4 x 3/8 | 42.2 | 17.1 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 2.3 | 3.2 | 4.0 | 6.4 | |||
| 1-1/4 x 1/2 | 42.2 | 21.3 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 2.8 | 3.7 | 4.7 | 7.5 | |||
| 1-1/4 x 3/4 | 42.2 | 26.7 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 2.9 | 3.9 | 5.5 | 7.8 | |||
| 1-1/4 x 1 | 42.2 | 33.4 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 3.4 | 4.5 | 6.4 | 9.1 | |||
| 1-1/2 x 1/8 | 48.3 | 10.3 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 1-1/2 x 1/4 | 48.3 | 13.7 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 1-1/2 x 3/8 | 48.3 | 17.1 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 2.3 | 3.2 | 4.0 | 6.4 | |||
| 1-1/2 x 1/2 | 48.3 | 21.3 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 2.8 | 3.7 | 4.7 | 7.5 | |||
| 1-1/2 x 3/4 | 48.3 | 26.7 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 2.9 | 3.9 | 5.5 | 7.8 | |||
| 1-1/2 x 1 | 48.3 | 33.4 | 114 | 3.7 | 5.1 | 7..1 | 10.2 | 3.4 | 4.5 | 6.4 | 9.1 | |||
| 1-1/2 x 1-1/4 | 48.3 | 42.2 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 3.6 | 4.9 | 6.4 | 9.7 | |||
| 2 x 1/8 | 60.3 | 10.3 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 2 x 1/4 | 60.3 | 13.7 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 2 x 3/8 | 60.3 | 17.1 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 2.3 | 3.2 | 4.0 | 6.4 | |||
| 2 x 1/2 | 60.3 | 21.3 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 2.8 | 3.7 | 4.7 | 7.5 | |||
| 2 x 3/4 | 60.3 | 26.7 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 2.9 | 3.9 | 5.5 | 7.8 | |||
| 2 x 1 | 60.3 | 33.4 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 3.4 | 4.5 | 6.4 | 9.1 | |||
| 2 x 1-1/4 | 60.3 | 42.2 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 3.6 | 4.9 | 6.4 | 9.7 | |||
| 2 x 1-1/2 | 60.3 | 48.3 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 3.7 | 5.1 | 7.1 | 10.2 | |||
| 2-1/2 x 1/8 | 73.0 | 10.3 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 2-1/2 x 1/4 | 73.0 | 13.7 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 2-1/2 x 3/8 | 73.0 | 17.1 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 2.2 | 3.2 | 4.0 | 6.4 | |||
| 2-1/2 x 1/2 | 73.0 | 21.3 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 2.8 | 3.7 | 4.7 | 7.5 | |||
| 2-1/2 x 3/4 | 73.0 | 26.7 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 2.9 | 3.9 | 5.5 | 7.8 | |||
|
·Dimensions in Millimeters
|
||||||||||||||
| Norminal Pipe Size (NPS) |
Outside Diameter | End to End |
Wall Thickness | |||||||||||
| Large End |
Small End |
T1 | T2 | |||||||||||
| Sch40 (STD) |
Sch80 (XS) |
Sch160 | XXS | Sch40 (STD) |
Sch80 (XS) |
Sch160 | XXS | |||||||
| D1 | D2 | "A" | ||||||||||||
| 2-1/2 x 1 | 73.0 | 33.4 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 3.4 | 4.5 | 6.4 | 9.1 | |||
| 2-1/2 x 1-1/4 | 73.0 | 42.2 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 3.6 | 4.9 | 6.4 | 9.7 | |||
| 2-1/2 x 1-1/2 | 73.0 | 48.3 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 3.7 | 5.1 | 7.1 | 10.2 | |||
| 2-1/2 x 2 | 73.0 | 60.3 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 3.9 | 5.5 | 8.7 | 11.1 | |||
| 3 x 1/8 | 88.9 | 10.3 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 3 x 1/4 | 88.9 | 13.7 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 3 x 3/8 | 88.9 | 17.1 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 2.3 | 3.2 | 40 | 6.4 | |||
| 3 x 1/2 | 88.9 | 21.3 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 2.8 | 3.7 | 4.7 | 7.5 | |||
| 3 x 3/4 | 88.9 | 26.7 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 2.9 | 3.9 | 5.5 | 7.8 | |||
| 3 x 1 | 88.9 | 33.4 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 3.4 | 4.5 | 6.4 | 8.1 | |||
| 3 x 1-1/4 | 88.9 | 42.2 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 3.6 | 4.9 | 6.4 | 9.7 | |||
| 3 x 1-1/2 | 88.9 | 48.3 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 3.7 | 5.1 | 7.1 | 10.2 | |||
| 3 x 2 | 88.9 | 60.3 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 3.9 | 5.5 | 8.7 | 11.1 | |||
| 3 x 2-1/2 | 88.9 | 73.0 | 203 | 5.5 | 7.6 | 11.5 | 15.2 | 5.2 | 7.0 | 9.5 | 14.0 | |||
| 3-1/2 x 1/8 | 101.6 | 10.3 | 203 | 5.7 | 8.1 | - | - | 1.7 | 2.4 | 3.2 | 4.8 | |||
| 3-1/2 x 1/4 | 101.6 | 13.7 | 203 | 5.7 | 8.1 | - | - | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 3-1/2 x 3/8 | 101.6 | 17.1 | 203 | 5.7 | 8.1 | - | - | 2.3 | 3.2 | 4.0 | 6.4 | |||
| 3-1/2 x 1/2 | 101.6 | 21.3 | 203 | 5.7 | 8.1 | - | - | 2.8 | 3.7 | 4.7 | 7.5 | |||
| 3-1/2 x 3/4 | 101.6 | 26.7 | 203 | 5.7 | 8.1 | - | - | 2.9 | 3.9 | 5.5 | 7.8 | |||
| 3-1/2 x 1 | 101.6 | 33.4 | 203 | 5.7 | 8.1 | - | - | 3.4 | 4.5 | 6.4 | 9.1 | |||
| 3-1/2 x 1-1/4 | 101.6 | 42.2 | 203 | 5.7 | 8.1 | - | - | 3.6 | 4.9 | 6.4 | 9.7 | |||
| 3-1/2 x 1-1/2 | 101.6 | 48.3 | 203 | 5.7 | 8.1 | - | - | 3.7 | 5.1 | 7.1 | 10.2 | |||
| 3-1/2 x 2 | 101.6 | 60.3 | 203 | 5.7 | 8.1 | - | - | 3.9 | 5.5 | 8.7 | 11.1 | |||
| 3-1/2 x 2-1/2 | 101.6 | 73.0 | 203 | 5.7 | 8.1 | - | - | 5.2 | 7.0 | 9.5 | 14.0 | |||
| 3-1/2 x 3 | 101.6 | 88.9 | 203 | 5.7 | 8.1 | - | - | 5.5 | 7.6 | 11.5 | 15.2 | |||
| 4 x 1/4 | 114.3 | 13.7 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 2.2 | 3.0 | 3.7 | 6.1 | |||
| 4 x 3/8 | 114.3 | 17.1 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 2.3 | 3.2 | 4.0 | 6.4 | |||
| 4 x 1/2 | 114.3 | 21.3 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 2.8 | 3.7 | 4.7 | 7.5 | |||
| 4 x 3/4 | 114.3 | 26.7 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 2.9 | 3.9 | 5.5 | 7.8 | |||
| 4 x 1 | 114.3 | 33.4 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 3.4 | 4.5 | 6.4 | 9.1 | |||
| 4 x 1-1/4 | 114.3 | 42.2 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 3.6 | 4.9 | 6.4 | 9.7 | |||
| 4 x 1-1/2 | 114.3 | 48.3 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 3.7 | 5.1 | 7.1 | 10.2 | |||
| 4 x 2 | 114.3 | 60.3 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 3.9 | 5.5 | 8.7 | 11.1 | |||
| 4 x 2-1/2 | 114.3 | 73.0 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 5.2 | 7.0 | 9.5 | 14.0 | |||
| 4 x 3 | 114.3 | 88.9 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 5.5 | 7.6 | 11.5 | 15.2 | |||
| 4 x 3-1/2 | 114.3 | 101.6 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 5.7 | 8.1 | - | - | |||
|
·Wall Thicknee (T1,T2) in Accordence with ASME B36. 10M.
PBE:Plain Both Ends BBE:Bevel Both Ends TBE:Thread Both Ends PSE:Plain Small Ends BSE:Bevel Small Ends TSE:Thread Small Ends PLE:Plain Large Ends BLE:Bevel Large Ends TLE:Thread Large Ends |
||||||||||||||
|
DIMENSIONAL TOLERANCES OF SWAGED NIPPLES ·Dimensions in Millimeters
|
|||||||||||
| Nominal Pipe Size (NPS) |
Overall Length (mm) |
Outsside Diameter at End | Wall Thickness (see Note 1) |
||||||||
| Square Cut Ends (mm) |
Other End Connections (mm) |
||||||||||
| 1/8~3/8 | ±2 | +0.40 -0.80 |
±0.80 | Not less than 87.5% of nominal wall thickness |
|||||||
| 1/2~1-1/2 | ±2 | +0.40 -0.80 |
+1.50 -0.80 |
||||||||
| 2~2-1/2 | ±3 | -0.80 | +1.50 -0.80 |
||||||||
| 3~4 | ±3 | ±0.80 | ±1.50 | ||||||||
Product Consultation