Product
- Home
- >
- Product
- >
- High Pressure Tubes & Fittings High Pressure Pipes & Fittings
- >
- HP-HNIP HEX NIPPLE
-
-
HP-HNIP HEX NIPPLE
Specification
| Designation part number system | |||||
| HP | 1 | 2 | 3 | 4 | 5 |
| Name of Fitting | Pressure & NIP thickess | Hub Size | Port type: Thread End&Socket-Weld End | Material | |
| 1 Name of Fitting | |||||
| Name of fittings | Code | ||||
| Reference Cat.NO. | |||||
| 2 Pressure & NIP thickess | |||||
| Pressure | Code | ||||
| Thread End: 2000, 3000, 6000 LBS | 2, 3, 6 | ||||
| Socket-Weld End: 3000, 6000, 9000 LBS | 3, 6, 9 | ||||
| NIP Pipe thickness | Code | ||||
| SCH40, SCH80, SCH160, XXS | S40, S80, S160, XXS | ||||
| 3 Hub Size / Code | ||||||||||||
| Hub Size | 1/8" | 1/4" | 3/8" | 1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" |
| Code | 01 | 02 | 03 | 04 | 06 | 1 | 12 | 15 | 2 | 25 | 3 | 4 |
| 4 Port type: Thread End&Socket-Weld End | |||||
| Port Type | Code | ||||
| Thread standard: BSPT | P | ||||
| Thread standard: NPT | N | ||||
| Socket-Weld End | SW | ||||
| 5 Material / Code | |||||
| Material | Code | ||||
| A105, A106 | A (Anti-rust Oil Coating ) | ||||
| A105, A106 | E (Zinc Electroplated ) | ||||
| A105, A106 | H (Hot Dip Galvanized ) | ||||
| A182 F304 (304L) | S4 (304#) | ||||
| A182 F316 (316L) | S6 (316#) | ||||
| Optional Material SPEC: A350 LF2, A403, A234, A182 (F304H, F317L, F321, F5, F9, F11, F22, F44, F51, F53, F91) |
|||||
| DIM.SPEC. : ASME B16.11 | MSS SP-79，83，95，97，BS3799 | ||||
| Example | |||||
| HP | T | 2 | 04 | N | A |
| Name of Fitting | Pressure & NIP thickness | Hub Size | Port type: Thread End&Socket-Weld End | Material | |
| Tee | 2000 LBS | 1/2" | NPT | A105 | |
| HP | NIP | S80 | 1 | N | 3L | S6 |
| Name of Fitting | Pressure & NIP thickness | Hub Size | Port type: Thread End&Socket-Weld End | NIP Length | Material | |
| Nipple | SCH 80 | 1" | NPT | 3"L(75mm) | A182 F316 | |
| HP | HBU | 3 | 1M | N | 06F | N | S6 |
| Name of Fitting | Pressure & NIP thickness | Hub Size(Male) | Port type: Thread End&Socket-Weld End | Hub Size(Female) | Port type: Thread End&Socket-Weld End | Material | |
| Bushing | 3000 LBS | Male | NPT | Female | NPT | A182 F316 | |
Introduction
HEX NIPPLES.
ANSI/ASME BS3799-1974
ANSI/ASME BS3799-1974
|
·Dimensions in Millimeters
|
||||||
| Size NPS |
C | L1 | L | d | H | |
| 3M | 6M | |||||
| 1/8 | 6.0 | 10.0 | 26.0 | 4.0 | - | 12.0 |
| 1/4 | 8.0 | 14.0 | 36.0 | 6.4 | - | 17.0 |
| 3/8 | 8.0 | 14.0 | 36.0 | 9.2 | 4.3 | 19.0 |
| 1/2 | 9.0 | 19.0 | 47.0 | 11.8 | 6.4 | 24.0 |
| 3/4 | 10.0 | 19.0 | 48.0 | 15.6 | 11.1 | 30.0 |
| 1 | 11.0 | 24.0 | 59.0 | 20.7 | 15.2 | 35.0 |
| 1-1/4 | 12.0 | 24.0 | 60.0 | 29.5 | 22.8 | 46.0 |
| 1-1/2 | 14.0 | 24.0 | 62.0 | 34.0 | 28.0 | 50.0 |
| 2 | 16.0 | 26.0 | 68.0 | 42.9 | 38.2 | 65.0 |
| 2-1/2 | 18.0 | 38.0 | 94.0 | 53.8 | - | 50.0 |
| 3 | 20.0 | 40.0 | 100.0 | 66.5 | - | 95.0 |
| 4 | 24.5 | 40.0 | 105.0 | 87.3 | - | 125.5 |
|
·Dimensions in Millimeters
|
|||||||
| Size NPS |
C | L1 | L2 | L | d | H | |
| 3M | 6M | ||||||
| 3/8 x 1/4 | 8.0 | 14.0 | 14.0 | 36.0 | 6.4 | - | 19.0 |
| 1/2 x 1/4 | 9.0 | 19.0 | 14.0 | 42.0 | 6.4 | - | 24.0 |
| 1/2 x 3/8 | 9.0 | 19.0 | 14.0 | 42.0 | 9.2 | 4.3 | 24.0 |
| 3/4 x 1/4 | 10.0 | 19.0 | 14.0 | 43.0 | 6.4 | - | 30.0 |
| 3/4 x 3/8 | 10.0 | 19.0 | 14.0 | 43.0 | 9.2 | 4.3 | 30. |
| 3/4 x 1/2 | 10.0 | 19.0 | 19.0 | 48.0 | 11.8 | 6.4 | 30.0 |
| 1 x 3/8 | 11.0 | 24.0 | 14.0 | 49.2 | 9.2 | 4.3 | 35.0 |
| 1 x 1/2 | 11.0 | 24.0 | 19.0 | 54.0 | 11.8 | 6.4 | 35.0 |
| 1 x 3/4 | 11.0 | 24.0 | 19.0 | 54.0 | 15.6 | 111 | 35.0 |
| 1-1/4 x 1/2 | 12.0 | 24.0 | 19.0 | 55.0 | 11.8 | 6.4 | 46.0 |
| 1-1/4 x 3/4 | 12.0 | 24.0 | 19.0 | 55.0 | 15.6 | 11.1 | 46.0 |
| 1-1/4 x1 | 12.0 | 24.0 | 24.0 | 60.0 | 20.7 | 15.2 | 46.0 |
| 1-1/2 x 3/4 | 14.0 | 24.0 | 19.0 | 57.0 | 15.6 | 11.1 | 50.0 |
| 1-1/2 x 1 | 14.0 | 24.0 | 24.0 | 62.0 | 20.7 | 15.2 | 500 |
| 1-1/2 x 1-1/4 | 14.0 | 24.0 | 24.0 | 62.0 | 29.5 | 22.8 | 50.0 |
| 2 x 1 | 16.0 | 26.0 | 24.0 | 66.0 | 20.7 | 15.2 | 65.0 |
| 2 x 1-1/4 | 16.0 | 26.0 | 24.0 | 66.0 | 29.5 | 22.8 | 65.0 |
| 2 x 1-1/2 | 16.0 | 26.0 | 24.0 | 66.0 | 34.0 | 28.0 | 65.0 |
| 2-1/2 x 1-1/4 | 18.0 | 38.0 | 24.0 | 80.0 | 29.5 | 22.8 | 80.0 |
| 2-1/2 x 1-1/2 | 18.0 | 38.0 | 24.0 | 80.0 | 34.0 | 28.0 | 80.0 |
| 2-1/2 x 2 | 18.0 | 38.0 | 26.0 | 82.0 | 42.9 | 38.2 | 80.0 |
| 3 x 1-1/2 | 20.0 | 40.0 | 24.0 | 84.0 | 34.0 | 28.0 | 95.0 |
| 3 x 2 | 20.0 | 40.0 | 26.0 | 86.0 | 42.9 | 38.2 | 95.0 |
| 3 x 2-1/2 | 20.0 | 40.0 | 38.0 | 98.0 | 53.8 | - | 95.0 |
Product Consultation