- Home
- >
- Product
- >
- Hardware Parts
- >
- Angle Steels
Specification
Designation part number system | |||||
HW | 1 | 2 | 3 | 4 | 5 |
Name of Fitting | Dimension | Thickness | Length | Material | |
1 Name of Fittings / Code | |
Name of Fittings | Code |
Angle Steel(No punching) | AGN |
Angle Steel(Single-sided punching) | AGO |
Angle Steel(double-sided punching) | AG2O |
2 Dimension/ Code | |||||
Dimension | Code | ||||
The code is the same as side length A/B (Dimension) |
3 Thickness / Code | ||||||||||||||
Thickness | 2.3t | 2.5t | 3t | 3.5t | 4t | 5t | 5.5t | 6t | 7t | 8t | 9t | 10t | 12t | 13t |
Code | 23 | 25 | 30 | 35 | 40 | 50 | 55 | 60 | 70 | 80 | 90 | 100 | 120 | 130 |
4 Length / Code | |
Length | Code |
3 Meters | 3 |
6 Meters | 6 |
5 Material / Code | |||||
Material | Code | ||||
Steel / Zinc Electroplated | E | ||||
SUS304 | S4 | ||||
Steel / Hot Dip Galvanized | H | ||||
SUS316 | S6 | ||||
Steel / Natural | A |
NOTE | |||||
NOTE | |||||
Angle steel made by folding steel plate is optional. The length , thickness and punching position can be customized according to customer requirements. |
|||||
Example | |||||
HW | AGO | 50 | 35 | 3 | E |
Name of Fitting | Dimension | Thickness | Length | Material | |
Angle Steel(Single-sided punching) | 50mm | 3.5t | 3M | Steel / Zinc Electroplated | |
HW | AGN | 65 | 60 | 6 | H |
Name of Fitting | Dimension | Thickness | Length | Material | |
Angle Steel(No punching) | 65mm | 6t | 6M | Steel / Hot Dip Galvanized | |
Introduction
Dimension | Weight | ||||
A(B)xt/mm | kg/M | kg/6M | |||
25*2.5 | 0.946 | 5.68 | |||
25*3 | 1.12 | 6.72 | |||
30*2.5 | 1.14 | 6.84 | |||
30*3 | 1.36 | 8.16 | |||
30*4 | 1.76 | 10.56 | |||
38*2.5 | 1.46 | 8.76 | |||
38*3 | 1.74 | 10.44 | |||
38*4 | 2.26 | 13.56 | |||
38*5 | 2.79 | 16.74 | |||
40*3 | 1.83 | 10.98 | |||
40*4 | 2.39 | 14.34 | |||
40*5 | 2.95 | 17.70 | |||
50*4 | 3.06 | 18.36 | |||
50*5 | 3.77 | 22.62 | |||
50*6 | 4.43 | 26.58 | |||
50*8 | 5.78 | 34.68 | |||
65*6 | 5.91 | 35.46 | |||
65*8 | 7.66 | 45.96 | |||
75*6 | 6.85 | 41.10 | |||
75*9 | 9.96 | 59.76 | |||
75*12 | 13 | 78.00 | |||
90*7 | 9.59 | 57.54 | |||
90*10 | 13.3 | 79.80 | |||
90*13 | 17 | 102.00 | |||
100*7 | 10.7 | 64.20 | |||
100*10 | 14.9 | 89.40 | |||
100*13 | 19.1 | 114.60 | |||
Shape and Tolerance on Dimension CNS1490&JIS G3192 | |||||
項目 | 區分 | 許可差 | 摘要 | ||
Item | Sub-Item | Tolerance | Remark | ||
Width A or B |
B<50 | ±1.5 | |||
50≦B<100 | ±2.0 | ||||
100≦B<200 | ±3.0 | ||||
200≦B | ±4.0 | ||||
Thickness t |
B<130 | t<6.3 | ±0.6 | ||
6.3≦t<10 | ±0.7 | ||||
10≦t<16 | ±0.8 | ||||
16≦t | ±1.0 | ||||
130≦B | t<6.3 | ±0.7 | |||
6.3≦t<10 | ±0.8 | ||||
10≦t<16 | ±1.0 | ||||
16≦t<25 | ±1.2 | ||||
25≦t | ±1.5 | ||||
Length L |
L≦7M | +40, 0 | |||
7M |
Add 5mm to plus side tolerance for every increase of 1m or its fraction |
||||
直角度 T |
All Sizes | T≦2.5%xB | |||
彎曲度 Warpage |
All Sizes | 0.3% xL max | To be applied to warapge upward and downward, and to the right and left. |
||
單位Unit: mm |
AGO/AG2O Angle Steels Single or double-sided punching | |||||
產品型號 | Dimensions (mm) | ||||
Cat.NO. | Width | 厚度 | 沖孔型式 | 長 | |
A | B | Thickness | Punch Hole Type | Length | |
HW-AGO |
40 | 40 | 2.3 | Single-sided punching | 3M |
50 | 50 | 3.5 | 3M | ||
50 | 50 | 5 | 3M | ||
50 | 50 | 5.5 | 3M | ||
50 | 50 | 6 | 3M | ||
65 | 65 | 5.5 | 3M | ||
65 | 65 | 6 | 3M | ||
75 | 75 | 6 | 3M | ||
HW-AG2O |
40 | 40 | 2.3 | double-sided punching | 3M |
50 | 50 | 3.5 | 3M | ||
50 | 50 | 5 | 3M | ||
50 | 50 | 5.5 | 3M | ||
50 | 50 | 6 | 3M | ||
65 | 65 | 5.5 | 3M | ||
65 | 65 | 6 | 3M | ||
75 | 75 | 6 | 3M |
Product Consultation