Product
- Home
- >
- Product
- >
- Electrical System & Instrumentation Power Installation Conduits & Fittings
- >
- Medium Wall Polyolef in Tubing
-
-
Medium Wall Polyolef in Tubing
ApplicationHigh shrink ratio and hot melt adhesive, which provide excellen t properties of insulation and protection to cable joints and terminations. And high abrasion and corrosion resistance for applying in communication cable an d chemical pipe.
Specification
Characteristic
Shrinkable Ratio 3:1
Easily fit over irregular shape and large connectors
Resistant to UV and waterproof
Excellent electrical insulation
Operating Temperature Range
Operating temperature : -55℃～110℃
Minimum shrink temperature : 80℃
Minimum fully recovery temperature : 120℃
Introduction
| Product Dimensions
單位：mm
|
|||||
| Cat.NO. | As supplied | After recovered | Standard Length | ||
| Min. | Max. | Min. | |||
| ATM-8-2 | 8 | 2 | 1.7 | 1220 | |
| ATM-12-3 | 12 | 3 | 1.8 | 1220 | |
| ATM-16-5 | 16 | 5 | 2.0 | 1220 | |
| ATM-19-5 | 19 | 5 | 2.2 | 1220 | |
| ATM-22-6 | 22 | 6 | 2.2 | 1220 | |
| ATM-28-6 | 28 | 6 | 2.5 | 1220 | |
| ATM-33-8 | 33 | 8 | 2.5 | 1220 | |
| ATM-40-12 | 40 | 12 | 2.5 | 1220 | |
| ATM-44-14 | 44 | 14 | 2.5 | 1220 | |
| ATM-55-16 | 55 | 16 | 2.7 | 1220 | |
| ATM-65-19 | 65 | 19 | 2.8 | 1220 | |
| ATM-75-22 | 75 | 22 | 3.0 | 1220 | |
| ATM-85-25 | 85 | 25 | 3.0 | 1220 | |
| ATM-95-25 | 95 | 25 | 3.0 | 1220 | |
| ATM-115-34 | 115 | 34 | 3.3 | 1220 | |
| ATM-140-42 | 140 | 42 | 3.5 | 1220 | |
| ATM-160-50 | 160 | 50 | 3.5 | 1220 | |
| ATM-180-58 | 180 | 58 | 3.5 | 1220 | |
| ATM-205-65 | 205 | 65 | 3.5 | 1220 | |
| ATM-235-65 | 235 | 65 | 3.7 | 1220 | |
| ATM-265-75 | 265 | 75 | 4.0 | 1220 | |
| ATM-300-85 | 300 | 85 | 4.0 | 1220 | |
| ATM-350-100 | 350 | 100 | 4.3 | 1220 | |
| ATM-380-150 | 380 | 150 | 4.3 | 1220 | |
| ATM-410-150 | 410 | 150 | 4.3 | 1220 | |
| ．Standard color: Black and Gray (Other colors, special size, cut pleces are available on request.) |
|||||
| Technical Date | |||||
| Property | Test Method | Typical Value | |||
| Property | Test Method | Typical Value | |||
| Operating temperature | IEC 216 | -55ºC~+110ºC | |||
| Tensile strength | ASTM D 2671 | ≧14 Mpa | |||
| Elongation at breal | ASTM D2671 | ≧400% | |||
| Density | ASTM D 792 | 1.05g/cm3 | |||
| Longitudinal shrinkage | UL 224 | 0~10% | |||
| Eccentricity | ASTM D 2671 | <30% | |||
| Elongation at break after aging | 150ºC, 168hrs | ≧300% | |||
| Dielectric strength | IEC 243 | ≧20KV/mm | |||
| Volume resistance | IEC 93 | ≧1014Ω.cm | |||
| Copper stability | ASTM D 2671 | Pass | |||
| Resistance to stress cracking (50ºC) | ASTM D 1693 | No cracking | |||
| Water absorption | ISO 62 | < 0.15% | |||
| Thermoplastic Adhesive | |||||
| Water absorption | ISO 62 | < 0.2% | |||
| Softening point | ASTM D E28 | 85ºC | |||
| Peel Strength (PE) | DIN 30672 | 4N/cm | |||
| Copper stability | ASTM D 2671 | Non~corrosive | |||
| Resistance to fungus and decay | ISO 846 | Pass | |||
Product Consultation