Product
- Home
- >
- Product
- >
- Electrical System & Instrumentation Power Installation Conduits & Fittings
- >
- ME Type Enlargers and Adapters
-
-
ME Type Enlargers and Adapters
ApplicationTo enlarge the trade size of a tapped hole or hub
Specification
- Material
- Finish
- Code
- Steel
- Zinc Electroplated
- E
- Ductile Iron
- Hot Dip Galvanized
- H
- Stainless Steel 304
- S4
- Stainless Steel 316
- S6
- Aluminum Alloy
- AL
Note
Standard Material: Ductile Iron
Standard Finish: Hot Dip Galvanized
Other Material/Finish can be produced
by order
- Thread Standards
- Code
- BSPT
- P
- NPT
- N
How to Order
For optional thread standards of ME, add the
suffix"P,N" for thread to the end of Cat No.,
optional material of ME, add the suffix"-E, H,
S4, S6, AL" after the thread code.
Ex: R-ME-25N06P-H, R-ME-06P04P-S4⋯
Introduction
| Cat.NO. | Conduit Size | Dimensions (mm) | ||||
| Cat.NO. | Male | Female | A | B | ||
| R-ME-06*04* | 3/4" | 1/2" | 45 | 39 | ||
| R-ME-1*04* | 1" | 1/2" | 50 | 47 | ||
| R-ME-1*06* | 3/4" | 50 | 47 | |||
| R-ME-12*04* | 1-1/4" | 1/2" | 48 | 49 | ||
| R-ME-12*06* | 3/4" | 48 | 49 | |||
| R-ME-12*1* | 1" | 52 | 49 | |||
| R-ME-15*04* | 1-1/2" | 1/2" | 48 | 55 | ||
| R-ME-15*06* | 3/4" | 48 | 55 | |||
| R-ME-15*1* | 1" | 52 | 55 | |||
| R-ME-15*12* | 1-1/4" | 53 | 55 | |||
| R-ME-2*04* | 2" | 1/2" | 52 | 70 | ||
| R-ME-2*06* | 3/4" | 52 | 70 | |||
| R-ME-2*1* | 1" | 56 | 70 | |||
| R-ME-2*12* | 1-1/4" | 57 | 70 | |||
| R-ME-2*15* | 1-1/2" | 58 | 70 | |||
| R-ME-25*04* | 2-1/2" | 1/2" | 65 | 95 | ||
| R-ME-25*06* | 3/4" | 65 | 95 | |||
| R-ME-25*1* | 1" | 65 | 95 | |||
| R-ME-25*12* | 1-1/4" | 65 | 95 | |||
| R-ME-25*15* | 1-1/2" | 65 | 95 | |||
| R-ME-25*2* | 2" | 65 | 95 | |||
| R-ME-3*04* | 3" | 1/2" | 75 | 115 | ||
| R-ME-3*06* | 3/4" | 75 | 115 | |||
| R-ME-3*1* | 1" | 75 | 115 | |||
| R-ME-3*12* | 1-1/4" | 75 | 115 | |||
| R-ME-3*15* | 1-1/2" | 75 | 115 | |||
| R-ME-3*2* | 2" | 75 | 115 | |||
| R-ME-3*25* | 2-1/2" | 75 | 115 | |||
| R-ME-4*04* | 4" | 1/2" | 85 | 140 | ||
| R-ME-4*06* | 3/4" | 85 | 140 | |||
| R-ME-4*1* | 1" | 85 | 140 | |||
| R-ME-4*12* | 1-1/4" | 85 | 140 | |||
| R-ME-4*15* | 1-1/2" | 85 | 140 | |||
| R-ME-4*2* | 2" | 85 | 140 | |||
| R-ME-4*25* | 2-1/2" | 85 | 140 | |||
| R-ME-4*3* | 3" | 85 | 140 | |||
| ．Tolerance：±5% ．Metric Fine Thread and PG Thread are optional. Please contact us. |
||||||
Product Consultation