- Home
- >
- Product
- >
- Electrical System & Instrumentation Power Installation Conduits & Fittings
- >
- RE Type Reducers
Specification
- Material
- Finish
- Code
- Steel
- Zinc Electroplated
- E
- Stainless Steel 304
- S4
- Stainless Steel 316
- S6
- Aluminum Alloy
- AL
Note
Standard Material: Steel
Standard Finish: Zinc Electroplated
Other Material/Finish can be produced
by order
- Thread Standards
- Code
- BSPT
- P
- NPT
- N
How to Order
For optional thread standards of RE, add the
suffix"P,N" for thread to the end of Cat No.,
optional material of RE, add the suffix"-E, S4,
S6, AL" after the thread code.
Ex: R-RE-25N06P-E, R-RE-06P04P-S4⋯
Introduction
Cat.NO. | Conduit Size | Dimensions (mm) | ||||
Cat.NO. | Male | Female | A | B | ||
R-RE-06*04* | 3/4" | 1/2" | 20 | 26.5 | ||
R-RE-1*04* | 1" | 1/2" | 20 | 33 | ||
R-RE-1*06* | 3/4" | 20 | 33 | |||
R-RE-12*04* | 1-1/4" | 1/2" | 25 | 42 | ||
R-RE-12*06* | 3/4" | 25 | 42 | |||
R-RE-12*1* | 1" | 25 | 42 | |||
R-RE-15*04* | 1-1/2" | 1/2" | 25 | 48 | ||
R-RE-15*06* | 3/4" | 25 | 48 | |||
R-RE-15*1* | 1" | 25 | 48 | |||
R-RE-15*12* | 1-1/4" | 25 | 48 | |||
R-RE-2*04* | 2" | 1/2" | 25 | 60 | ||
R-RE-2*06* | 3/4" | 25 | 60 | |||
R-RE-2*1* | 1" | 25 | 60 | |||
R-RE-2*12* | 1-1/4" | 25 | 60 | |||
R-RE-2*15* | 1-1/2" | 25 | 60 | |||
R-RE-25*04* | 2-1/2" | 1/2" | 34 | 72 | ||
R-RE-25*06* | 3/4" | 34 | 72 | |||
R-RE-25*1* | 1" | 34 | 72 | |||
R-RE-25*12* | 1-1/4" | 34 | 72 | |||
R-RE-25*15* | 1-1/2" | 34 | 72 | |||
R-RE-25*2* | 2" | 34 | 72 | |||
R-RE-3*04* | 3" | 1/2" | 34 | 88 | ||
R-RE-3*06* | 3/4" | 34 | 88 | |||
R-RE-3*1* | 1" | 34 | 88 | |||
R-RE-3*12* | 1-1/4" | 34 | 88 | |||
R-RE-3*15* | 1-1/2" | 34 | 88 | |||
R-RE-3*2* | 2" | 34 | 88 | |||
R-RE-3*25* | 2-1/2" | 34 | 88 | |||
R-RE-4*04* | 4" | 1/2" | 38 | 113 | ||
R-RE-4*06* | 3/4" | 38 | 113 | |||
R-RE-4*1* | 1" | 38 | 113 | |||
R-RE-4*12* | 1-1/4" | 38 | 113 | |||
R-RE-4*15* | 1-1/2" | 38 | 113 | |||
R-RE-4*2* | 2" | 38 | 113 | |||
R-RE-4*25* | 2-1/2" | 38 | 113 | |||
R-RE-4*3* | 3" | 38 | 113 | |||
.Tolerance:±5% . Metric Fine Thread and PG Thread are optional. Please contact us. |
Product Consultation