Material preservation instructions
2020-06-01
★ Informed about the problems caused by the outdoor storage of various materials sold by the company ★ Basically, the storage environment of various products is the normal temperature space of the indoor space (with roof and surrounding walls), and the dehumidification environment is particularly preferred. |
||||
Material | Surface treatment | Problems caused by being outdoors | ||
Iron or cast iron | no | Due to outdoor high temperature and humidity problems, the surface will rust for a short time | ||
Zinc Electroplated | If the moisture cannot be dried in a short time, there will be oxidation | |||
Hot Dip Galvanized | If the moisture cannot be dried in a short time, there will be oxidation | |||
Spray paint, paint Coating | Will cause paint peeling off due to high temperature and ultraviolet rays | |||
stainless steel | no | It will also get rusty, and its oxidation rate is slower than iron | ||
Spray paint, paint Coating | Will cause paint peeling off due to high temperature and ultraviolet rays | |||
copper products | no | It will also get rusty, and its oxidation rate is slower than iron | ||
aluminum products | no | Combined with air, it will produce alumina, which will adhere to the surface similar to the general metal rust | ||
Liquidtight Flexible Conduits | no | The whole roll packaging should be kept indoors. If the whole roll bundle is exposed to high temperature or outdoor sunlight for a long time, it will cause the PVC coating on the curled part to bulge | ||
Plastic products | no | Plastic products will be deteriorated due to ultraviolet rays and high temperature, so they should be kept in indoor environment |